General Questions

Does PulseTech offer Battery Chargers?

Yes. We offer several types of chargers including the XC100 Xtreme Charge, the X2 dual station Xtreme Charge and the SC-12 Pulse Charger – 12-station charger.

The Xtreme Charge single and dual station units are state-of-the-art "smart" charging systems that are actually four chargers in one. It's a state-of-the-art charging system (up to 2.5 amps) that works with all 12-volt lead-acid battery types including conventional flooded lead-acid batteries and sealed "maintenance-free" batteries, including VRLA, AGM and gel cell batteries. They also works off either 110- or 220-volt ac power so it can be used virtually anywhere in the world. At the same time, the Xtreme Charge uses our unique and patented Pulse Technology to remove sulfation buildup. Use either of these Pulse Chargers to return unreliable 12-Volt lead-acid batteries to active service.

The SC-12 is a multiple (12 station) 6A battery charger. It is a portable charger that can solve your battery problems much more quickly – times 12! It not only charges 12 batteries at a time but will maintain and condition them as well. It's ideal for all service facilities that deal with multiple vehicles with multiple batteries.

Take a look in our store for more information about our battery chargers.

Is it possible to recover a dead battery that will no longer accept a charge?

Yes, if you are using our Pulse Technology products. Although our products are designed for keeping good, new batteries in peak condition for a longer period of time, some of them can be used to bring batteries that will not accept and hold a charge back to useful condition.

Here's what you do: Use a PulseTech 390PT (741X390) Digital Battery Analyzer to determine if the battery is a good candidate for recovery (Note: Even though the analyzer may read "REPLACE BATTERY," it could still be recoverable.)

The ideal way to recover a battery is to use our Xtreme Charge 20A Pulse Recovery / Maintenance Charger. Make sure the cells are filled with distilled water and attach the battery to the Pulse Charger. If the Bad Battery light begins to flash, it is indicating a problem and the battery is probably not recoverable. If the light does not flash, you can proceed.

Leave the Charger on the battery for at least 36 hours. At any given point during the charge it may shut off automatically so it won't overcharge your battery. During the "off" period it is no longer charging but you will notice that it will continue to pulse condition the battery. As it continues to pulse and de-sulfate the battery it is likely to cycle through the charge and pulse sequence a number of times before the battery is brought back up to an improved condition. The number of times it may cycle will be dependent upon a number of factors including the age of the battery and the time it may have been sitting unused, the depth of discharge, the physical size of the battery (amount of plate surface area) and the depth or state of sulfation damage that may have occurred.

Next, use the PulseTech PT390 digital battery analyzer as mentioned above to check the battery for improvement. If there has been at least a 20% increase in Cold Cranking Amps (CCA), you may proceed repeating the process as needed, using the analyzer to check for improvement.

Keep in mind that some very badly sulfated battery plates could take several days to clean. Also, not all batteries can be totally recovered. If a battery has a short circuit or physical damage, it is impossible to bring back.

Does PulseTech offer AC-powered products?

Yes. The Xtreme Charge range of chargers are AC powered.

What makes PulseTech products different from other battery charging and maintenance products available on the market?

PulseTech offers many battery charging and maintenance products that utilize our revolutionary and patented Pulse Technology. This technology is designed to help prevent the main cause of battery problems and failure: sulfation buildup (lead sulfate deposits on the battery plates) and related problems. Some products may claim to provide the same benefits as ours, but most of them merely try to "maintain" the battery by charging them on a constant basis. The problem is too much charging will ultimately overheat and damage the lead plates. In other words, the "cure" could be worse than the disease when not done properly.

Other products even claim to remove lead sulfate deposits from the plates. But, this too is usually done by over charging the plates with high voltage in order to literally knock the sulfates loose. In this situation, only a few sulfates are removed as active plate material sheds and falls useless away from the battery plates. It's sort of like blowing up the house just to get rid of the termites.

On the other hand, PulseTech products enable the embedded sulfates to leave the plates and converts them to active electrolytes. They also help prevent sulfates from building up again and won't harm the battery or the vehicle charging system in any way.

Can they be used on more than one battery at a time?

It depends on the model. The standard Xtreme Charge (XC100-P) is designed for use on 12-Volt systems (2-6V batteries in series connection or one 12V battery only) unless it's connected to the QuadLink and can then maintain up to 4 12-Volt batteries.

The XC100 PARALLEL is designed for use on two 12V batteries connected in parallel. The SolarPulse (SP-2 and SP-5) are designed for use on 12V batteries.

The PowerPulse 24, 36 and 48-volt systems can work on batteries in parallel or individual batteries that are "voltage specific" which means they are designed to work only with their designated voltages: A 24-Volt PowerPulse on a 24-volt battery system only, and so on. They can also work on batteries in series: A 12-Volt PowerPulse can be used to charge 2 6-Volt batteries in series.

The 2-Station Xtreme Charge (X2) is designed for use on two 12-Volt batteries or a 24-Volt battery system. Two QuadLinks can also be connected allowing the charge of up to 8 12-Volt batteries or up to FOUR 24V commercial systems composed of two 12V batteries connected in series

The Pro-12-RP is designed to maintain up to 12 batteries at a time when in storage and/or waiting on a store shelf for sale.

The QuadLink is designed to maintain as many as four 6 or 12-Volt batteries depending on the capabilities of the battery charger.

Which product should I use when storing my vehicles for long periods of time?

We suggest you use the Xtreme Charge (XC100) if stored indoors with access to AC power or SolarPulse SP-2 or SP-5 if stored outdoors without access to AC power but access to the Sun's energy. Besides preventing sulfation buildup, they also prevent the normal loss of battery power no matter how long your vehicle or equipment sits unused -- even months at a time.

If you need to keep multiple batteries maintained then one of our QuadLink Kits is ideal. It comes with an Xtreme Charger and one or two QuadLink Multipliers (depending on which kit you decide on – either the XC-QL4-K1 or X2-QL4-K2) and will maintain either 4 or 8 batteries in peak condition.

Keep in mind that under normal conditions a battery will lose 1% of its energy a day while the vehicle sits unused. That means it will not take long for a battery to become completely discharged, especially if it was not fully charged in the first place. Xtreme Charge and Solar Pulse will not allow those batteries to loose energy and will maintain them indefinitely. The Solar Pulse will maintain and condition the battery and the Xtreme Charge will Charge, Maintain and Condition the battery every day.

If you do not have access to ac power or sunlight, you can use PowerPulse. Keep in mind that PowerPulse was designed more for vehicles and equipment that are used frequently or charged on a regular basis vs. those that are stored. Yet, based on lab testing, a 12-Volt PowerPulse will maintain a 12-volt battery for approximately 2 to 3 months off a full charge if left unattended. We're not saying the vehicle will always start at that point, but the battery will be free of sulfation buildup, will be able to be jump-started into action, and it will recharge and hold a charge like a new battery.

Will PulseTech products benefit other electrical components on my vehicle?

Yes. By maintaining your batteries in peak condition, your alternator does not have to work as hard at recharging your vehicle once it has started. The battery will accept a charge more readily and faster so alternator life should be extended. Plus, by maintaining available cranking amps in your battery, there will be more available energy going to your starter. The engine will turn over faster, so your starter should last longer as well.

Outside of sulfation damage, what are other common causes of battery failure that Pulse Technology will help?

It's interesting to note that other common causes of battery failure (buckled plates, shedding, overcharging, mossing, etc.) are directly related to sulfation buildup. For example, according to a leading battery service manual, buckled plates may be caused by, "being overcharged while sulfated or stored in a deeply discharged state." Sulfate buildup weakens the plates to a point where batteries must be overcharged to accept energy. This will then overheat and warp, or "buckle," the plates. This service manual also relates shedding of the plates to sulfation buildup. It states that, "If material has shed from the plates in small chunks, high charging rates on sulfated plates can be the cause." All in all, each of these and other common causes can be avoided in most cases through the use of our patented Pulse Technology.

Will PulseTech products work on gel cell batteries?

Yes. They work on any size lead-acid battery. This includes all conventional flooded lead-acid batteries and sealed "maintenance-free" batteries, including VRLA, absorbed glass mat (AGM) and gel cell battery types.

How quickly will sulfation buildup occur on a brand new battery?

The rate of sulfation buildup on a battery will vary greatly depending on battery state of charge, usage, age and condition. It will occur faster on batteries that are used infrequently but will still affect frequently-used vehicles (see next question).

Also, keep in mind that even brand new batteries may already be sulfated when they are installed on your vehicle. According to a leading service manual in the battery industry, "since sulfation buildup is likely to occur whenever batteries are neglected for long periods of time, it can occur in new batteries that have been in stock for a period of time as well as used ones."

Sulfation buildup begins to occur the moment electrolyte (acid) is added to a battery. So as new batteries sit in storage or on a store shelf, they, too, can suffer from this buildup. In order to ensure battery performance at all times, it is best if a Pulse Technology product -- such as the Xtreme Charge, SolarPulse or PowerPulse -- is installed or used on your battery the moment it is installed in your vehicle. Or the Pro-12 is put into use on your batteries in storage and/or waiting for sale.

Since sulfate buildup occurs more often with infrequently-used batteries, will I need Pulse Technology even if a vehicle is operated on a frequent basis, like a car or delivery truck?

Absolutely. Even frequently-used batteries charged by the alternator on a consistent basis may suffer from sulfate accumulations. This is especially true for cars, express delivery trucks, buses and other vehicles.

According to a leading service manual in the battery industry, "it is possible for a vehicle to develop an undercharged battery if it is constantly driven at slow speeds and left idling for long periods, as in heavy traffic and combined with high electrical load conditions." If a vehicle is moving at slower speeds, idling a lot or suffering from an overtaxed electrical system the alternator is not allowed to charge at an optimum rate. The result is a battery that is not fully charged even though the vehicle is running all day. And since it isn't fully charged, it will begin to sulfate. A vicious circle is then created because the more the battery sulfates the less energy it will accept and the battery will be undercharged even more. Ultimately, it too will become sulfated and fail to provide energy.

By keeping the battery plates clean with Pulse Technology, the battery capacity is increased so it will accept and store energy more efficiently which will help eliminate the problem of undercharging.

Is it true that charging batteries in reverse polarity will desulfate the plates and prepare it for a better recharge?

Absolutely not. This will actually damage your battery and could even lead to an explosion. Attempting to charge a battery in a reverse polarity should NEVER be performed for any reason.

Will weather affect my battery?

Yes. What many people don't realize is that extreme cases of heat and cold will increase the speed of sulfation buildup and the rate of discharge within a battery. For example, when the weather starts to get hotter, the rate of sulfation buildup will actually double for every 10-degree increase in temperature. That means that if the temperature goes from 75° to 95°, sulfation buildup on battery plates will occur 400% faster than normal. So….batteries stored or in vehicles in warm weather have the potential to fail due to the build-up of sulfation, much sooner than batteries stored or in vehicles in cooler weather.

Cold weather, this is a real "Domino Effect". When it's cold outside, sulfation buildup in combination with the slow-down of the chemical reaction within the battery will rob the batteries ability to provide operational power and is only exaggerated as vehicle fluids thicken due to the cold. This cold condition causes even more available power and capability to be taken from the battery to start the vehicle, so the battery has to work harder than normal to provide additional power demanded by the vehicle and as a result realizes a further reduction in voltage causing faster buildup of sulfates on the lead plates. Also, keep in mind that the battery's electrolyte can actually freeze if the battery is in an advanced state of discharge, and this could physically damage the lead plates. At 1.270 specific gravity (100% charged) battery acid will freeze at -83°F, at 1.200 it will freeze at -17°F and at 1.140 (completely discharged) it will freeze at only 8°F.

Will PulseTech products damage electrical systems on cars and other vehicles?

It is not possible for any of our products to damage the electrical system on any vehicle. By attaching the product to the battery, the pulsing energy is absorbed within the battery and is not "seen" elsewhere in the system. This technology has been applied to a variety of military vehicles with very sensitive launching systems or computer systems with no interference or problems.

Our products have also been evaluated by a major auto manufacturer and have passed all the emissions tests they put the products through. Our products can only enhance a vehicle electrical system, not detract.

Will PulseTech products hold up on day-to-day usage?

Absolutely! One of the reasons PulseTech first took this revolutionary technology to the U.S. Military many years ago was to verify the durability of the product. Because of our patented design and proprietary manufacturing process, our products are as durable, if not more so, than the piece of equipment you are mounting them on! This exceptional durability is also why we gave Xtreme Charge, SolarPulse and PowerPulse a 5-year limited product warranty!

Do the Xtreme Charge, SolarPulse and PowerPulse models have to stay on the same battery permanently or can you move them from battery to battery?

These units can be moved from battery to battery if the customer chooses to do so, but we strongly suggest you install them and use them on a regular basis. Remember that sulfation buildup happens 24-hours a day from the first moment the battery is "born" or acid is loaded into the battery. Although you can use Pulse Technology as a part-time fix, a continuous installation will give a much more effective result because not only do they eliminate the existing buildup, they also prevent the lead sulfates from building up again.

Do any PulseTech products work on 6-volt lead-acid batteries?

Yes. Although all of our products are designed for 12-volt systems application of Pulse Technology on 6-volt batteries can be achieved through series connection of 6 volt batteries creating a 12-, 24-, 36- or 48-volt system. Product use is dependent on final overall system voltage.

Are the PowerPulse and SolarPulse battery chargers?

Our SolarPulse range of products produce a charge for voltage maintenance when the battery's voltage falls below a predetermined point along with the desulfation process via a separate circuit. It provides enough power to offset the normal daily discharge of a battery (usually 3.1mA to 10.1mA depending on the battery chemistry) plus a nominal amount of parasitic drain. This was recently verified independently by one of the major U.S. auto manufacturers. Keep in mind, though, that while they do supply a charge and pulsing to the battery, the charge rate is not sufficient to charge a completely dead battery in a short time frame.

PowerPulse is a battery maintenance system designed to prevent sulfation buildup only. It will not charge.

Use of these Pulse Technology products will enable chargers to do their work more efficiently. Since they help keep the battery plates free of sulfate deposits, it takes less time to charge the battery and battery capacity is increased so it has greater discharge capabilities and it will last longer between charges.

What are the factors that determine when the Xtreme Charge shows 25%, 50%, 75% or 100% charged on its LED meter?

While we cannot tell you all the details as this is part of our patented process; we can tell you this much...The Xtreme Charge shows 25%, 50% or 75% based on a composite result comprised of multiple readings over time gathered and reported on by its microprocessor. These factors gathered by our patented algorithms and compiled and reported on by the Xtreme Charges microprocessor determines a reading of 25%, 50% or 75% charged. The 100% reading is shown based on a composite result gained from amperage acceptance over a given time period under charge and the level it has dropped down to over another period of time. As one technical editor stated in an article about our products – "The Xtreme Charge brings Dad's old buzzing box of diodes into the computer age!"

Will "double clamping" two sets of leads help me to charge a larger battery more quickly when using the SC-12?

Yes, clipping two sets of leads (one of each from two separate channels) on the SC-12 to a battery will safely double the amperage going to a given battery allowing a faster charge which is especially useful when charging a larger battery. Always top the battery off for a few hours with one channel (one set of leads) after bulk charge is complete.

Go Back to Top

What voltage windows is the Xtreme Charge Quick Battery Tester set at to determine 25%, 50%, 75% and 100% charged?

  • 25% - 9.8 to 12.0V
  • 50% - 12.0V to 12.4V
  • 75% - 12.4V – 12.6V
  • 100% 12.6 – 13.8V

Note: for battery state of charge indications the Quick Battery tester is a very basic open circuit voltage meter designed to help determine when a battery should be recharged. It is not intended to be used for in depth diagnostics.

What voltage window is the Xtreme Charge Quick Battery Tester set at to determine Good and Bad Alternator reading?

Good – 13.8V to 14.7V, Bad – 14.7V - up

Note: the Quick Battery tester is only a basic open circuit voltage meter designed to help determine if there may be a fault in the charging system – the "Bad" indicator light only lights as a result of a High voltage limit of 14.7V or higher – there is no low voltage indicator for a "Bad" reading.

Pulse Technology Questions

What is a pulse waveform?

Our Pulse Technology is defined by a distinct "pulse waveform" that has a strictly controlled rise time, pulse width, frequency, and amplitude of current and voltage pulse. It's the patented combination of the above that makes our products so different and so effective.

How does Pulse Technology work?

Pulse Technology is a unique, patented process that substantially eliminates sulfation buildup on battery plates, the main cause of lead-acid battery problems and failure. It works by reversing the natural electro-chemical reaction within the battery. In the normal energy transfer process within a lead acid battery, the sulfates in the electrolyte solution (battery acid) travel back and forth between the positive and negative plates, taking on and giving off energy. As lead sulfates form on the plates during the normal charge/discharge cycles, some of the sulfates will root to the plate and enlarge to the point where they will no longer accept or release energy.

Over time these sulfates can build up until battery efficiency is reduced and the battery finally ceases to function. Although there is actually enough reactive material in a battery to keep it working for many years, in most cases it doesn't because this sulfation buildup prevents the process.

In the past, nothing could effectively be done to stop sulfation buildup and related problems. Our patented Pulse Technology changes all that. This technology is a process that removes excess lead sulfate deposits from the plates and converts them back to active electrolyte.

When used regularly, PulseTech's battery charging and maintenance systems will also help prevent the lead sulfates from building up again, effectively extending battery service life.

What are the benefits of using Pulse Technology?

The main benefit of Pulse Technology is to ensure battery performance so you can rely on your battery any time you need it. As we said above, by cleaning the battery plates our unique Pulse Technology provides the following benefits:

  • Get better performance by maintaining maximum battery efficiency and reliability
  • Save money on battery costs by extending battery life dramatically
  • Helps batteries charge faster and maintain greater reserve capacity so they can provide more available power to your vehicles and accessories.
  • Help protect the environment by not having to discard batteries prematurely.

If Pulse Technology can extend the service life of a battery, how much longer will the battery last?

It's difficult to determine an exact length of time because service life of a battery varies depending on usage. One independent report stated that Pulse Technology could theoretically "make a battery last forever", but, obviously that's a little hard to prove. By using Pulse Technology, though, the life of your batteries will be extended dramatically. Keep in mind that there is actually enough reactive material in a battery to perform the energy transfer process for many, many years, but sulfation buildup has always prevented that from happening. Now, by preventing — and even removing — sulfation buildup, Xtreme Charge, Solar Pulse and PowerPulse and other products available from PulseTech Products Corporation, Pulse Technology products enable batteries to fulfill their true potential — in performance and life cycle.

Our products have been evaluated by NASA, Stennis Space Center, Management Equipment Evaluation Program (U.S. Air Force), the Army Research Lab, battery, auto and boat manufacturers, as well as commercial customers and individuals. The answer from all is the same — "This product does exactly what you say it does!" One evaluating source even stated in their conclusions that "we can't tell you exactly how long "the application of Pulse Technology" will make a battery last, but we estimate it will add at least eight to ten years of life."

Have any scientific studies been done on Pulse Technology?

Yes. Independent scientific studies by researchers at two major universities have confirmed that our patented Pulse Technology does provide exceptional benefits to all types of lead-acid batteries. These studies were conducted in response to a request from the scientific and engineering communities for scientific validation of claims that our technology actually improves battery efficiency and lengthens battery life. PulseTech contracted with Oakland University in Rochester, Michigan and Ohio State University in Columbus, Ohio to conduct separate evaluations of the technology.

Results of the studies confirmed that several significant improvements in lead-acid battery performance are attributable to our Pulse Technology. These improvements are caused by the effect of our exclusive and patented Pulse Technology in reducing the buildup of lead sulfate crystals on lead-acid battery plates.

During these studies, these crystalline buildups were regularly investigated by X-ray diffraction methods. The X-ray diffraction data confirmed the positive effects of pulsing on the battery plate morphology because it shows more even distribution of lead sulfate crystals over the surface area of the battery plates.

It also revealed a significant reduction in the size of the lead-sulfate crystals. These microscopic changes greatly improve a battery's ability to accept and store more energy. Because they store more energy, batteries are lasting longer between recharges, and they are capable of providing more available power than batteries not using our technology.

The effect of the pulsing on the formation of these crystalline structures also increases the battery's durability. Pulse Technology prevents sulfate-induced corrosion that is the primary cause of shedding of active material. By helping to prevent shedding, the average life span of the battery can be increased dramatically. Tests show that it is possible to get three to five or more times as many cycles from pulsed batteries than non-pulsed batteries. As a result, even batteries on frequently-used vehicles and equipment will receive significant benefits.

Can PulseTech's products overcome a battery's internal resistance?

The internal resistance within a battery is a function of the electro-chemical reaction that is taking place. You would not want to interfere with this, as it is part of the energy transfer process. However, you would want to offset the negative impact of this process, which is exactly what our patented Pulse Technology accomplishes.

By using our patented Pulse Technology to desulfate a battery on a daily basis, the battery will perform better, last longer, be more dependable and have more available energy for your use.

Recovery Charger Questions

What's the success rate for recovering batteries?

We expect you to recover 70%+ of your 'dead' batteries. It's important to remember that batteries with physical damage cannot be recovered.

Can I recover different battery types at the same time?

Yes, the charge stations operate in isolation from one another allowing any combination of battery brands or types (VRLA, AGM, gel and flooded cell) to be recovered at the same time.

How do I know what is happening to my batteries?

There are 5 LED Indicators next to each charging channel to show the state of the battery as it goes through the recovery process. The green light shows when the charge is complete. This is the amount of energy the battery is able to accept at this particular time. The battery may need to be desulfated longer in order to remove additional sulfate crystals from the battery plate which in turn allows a fuller charge. It is necessary to always use a 390PT or 777PT battery tester after recovering/charging a battery to view the actual capacity of the battery to determine if the battery is good and ready for installing in a vehicle.

How long should I leave the SC-2 Recovery Charger attached to my battery?

The time needed varies depending on the state of your battery. Some batteries will recover in a few hours, but others will take several days. Proprietary algorithms combined with microprocessor controlled technology determine and deliver the precise charge rate (variable up to 6A) based on the size and condition of the individual battery. Our patented Pulse Technology is applied to each battery to remove damaging sulfate deposits on battery plates. When the SC-2 has finished recovering the battery, the individual station LED will turn green and our 390PT or 777PT Battery Analyzer will determine when it can go back into service.

Can I leave the battery attached to the Recovery Charger after it has been restored?

The battery can be left on the Recovery Charger indefinitely with no chance of overcharging. Once the battery is fully recovered and charged completely, the Recovery Charger goes to "float mode" and will continue to monitor the battery and will come back on if needed, automatically. It will also continuously pulse the battery to maintain its full capacity. The more pulsing a battery sees, the better for the battery.

Solar Product Questions

How much sunlight does SolarPulse need to work?

The solar panel on the SolarPulse Battery Charge Maintenance System is so efficient it only needs one to two hours of direct sunlight a day to accomplish its task for a full 24 hours. This is true even if you live in areas where skies are cloudy or lightly overcast most of the time. In these situations the solar panel may require a little more time to absorb enough sunlight.

To make sure you are receiving the full benefit of SolarPulse Pulse Technology, make sure the solar panel is mounted in an area where it has access to as much available direct sunlight as possible. The solar panel will then absorb sunlight, convert it into energy and the circuit box will maintain and desulfate the battery on a daily basis.

Does SolarPulse need direct sunlight to work?

No, not really. Obviously, the better exposure to bright sunlight the more efficiently the unit works. But, because of the unique design, SolarPulse accomplishes its assigned tasks with minimal amounts of ultraviolet (UV) exposure. A rule of thumb is SolarPulse requires on average one to two hours per day of sunlight to provide benefit. Even cloud cover provides UV exposure that can then be converted to energy. Common sense plays a part, the more the better, but it doesn't have to be "Death Valley" sun to be effective. The SolarPulse works extremely well even in notoriously cloudy locations like Seattle.

Where should I install the solar panel?

Installation of the SolarPulse solar panel is one of personal preference. And since the SolarPulse employ solar panels with a fully encapsulated heavy duty polyurethane coating, they are weatherproof and virtually indestructible so they can be mounted almost anywhere.

Ideally, the most effective location for the solar panel is on top of your vehicle or equipment. That way it is sure to receive the most exposure to sunlight during the day. If for some reason you cannot mount it on top, be sure to put it some place where it will receive as much sunlight as possible. NOTE: Do not mount the panel behind a windshield if it is UV protected. Since the panel is so efficient, it can be installed either horizontally or vertically, but we suggest you mount it horizontally.

Do your solar panels generate more power in cold or hot weather?

PV cells generate more power in cold weather. As with most electronics, heat is an enemy. In this case heat causes resistance and a reduction in light to power conversion efficiency.

Do your solar panels provide power during overcast weather?

Yes, however overcast weather does cause a reduction in light to power conversion. Generally speaking in bright overcast weather conditions you would expect 50 to 70% efficiency. In dark overcast weather conditions you would expect 5 to 10% efficiency.

What is the efficiency of your solar panels over extended time periods – years?

With the use of premium mono-crystalline PV cells that we use, you can expect 95% efficiency in light to power conversion at the 20 year use period.

What is the functionality of the red LED on the SolarPulse Control Module box?

The steady red LED provides an indication that there is full sunlight shining on the solar panel and that the SolarPulse is connected properly and delivering power to the battery.

If the red LED on the SolarPulse Control Module box is flashing intermittently, what does this mean?

This means that sunlight being delivered to the solar panel is either intermit; possibly being blocked intermittently by shade, clouds tree branches, etc. Or, sunlight is weak from either dawn or dusk or a cloudy day.

Can the wire leads on the SolarPulse be repaired if cut either as part of the installation or inadvertently during or after installation?

Yes, as long as you solder the connections matching all colors for proper polarity and seal them heat shrink tubing you will be fine in repairing the leads in the field without effecting product functionality. Please note that once the product is modified – the warranty is void.

Can the wire leads on the SolarPulse be extended for installation as needed?

Yes, the wire leads between the solar panel and the control box can be extended by a maximum of 100' as long as the extended wire gauge segment is stepped up by one wire size to 16 AWG wire, you will be fine. In addition, using the same methodology as just mentioned, you may extend the leads between the battery and the control box by a maximum of 20' using stepped up 16 AWG wire extensions. Also, you will need to use a wire with like copper stranding, outer insulation and color, wire gauge size and quality. Solder the connections matching all colors for proper polarity and seal them with heat shrink tubing. If done as directed you will be fine in extending the leads in the field without effecting product functionality. Please note that once the product is modified – the warranty is void.

Can I place the Solar Pulse or any solar panel in the front dash area or rear deck of my Car, RV etc. to provide power and/or pulse conditioning to my vehicle battery?

Yes, but it is not recommended. You can expect to lose ~50 to 75% in amperage output due to the UV protection and tinting in some vehicle rear windows and/or windshields. Newer vehicles usually have more UV protection then older vehicles and due to this, are worse that older vehicles in this regard. In addition your panel could also lose significant "charge time" in the sun due to the shading effect that the vehicle roof will provide to the panel at various times of day and due to the various direction that the vehicle may be facing - North, South East or West. Directly on top of any vehicle is always best if possible.

PowerPulse Questions

What are the minimum voltage (Cut off) and maximum design voltage for each of the PowerPulse Products?

  • PP-12L (12V) – Min – 9.5V, Max – 36V
  • PP-24L (24V) – Min – 18V, Max – 48V
  • PP-36L (36V) – Min – 27V, Max – 60V
  • PP-48L (48V) – Min – 36V, Max – 72V

Note: Although the voltage windows are broad to allow for charging system voltage limits, proper application of the products based on the overall battery / battery pack voltage (PP-12L for 12 V Battery / Pack connection, etc.) is required based on the design optimization of the pulse amplitude for each specific battery / configuration.

Can PowerPulse units be damaged by voltage spikes?

Yes, any voltage over the maximum designed voltage may cause damage and is not covered under warranty.

Does the PowerPulse unit draw battery power continuously while connected?

Yes – The PowerPulse uses a small amount of battery power. It continually draws power out and pulses it back in, the net draw is small – only 3 to 4mA.

Can the wire leads on the PowerPulse be repaired if cut either as part of the installation or inadvertently during or after installation?

Yes, as long as you solder the connections matching all colors for proper polarity and seal them with heat shrink tubing you will be fine in repairing the leads in the field without effecting product functionality. Please note that once the product is modified – the warranty is void.

Can the wire leads on the PowerPulse be extended for installation as needed?

Yes, as long as the extended wire gauge is stepped up by one wire size to 16 AWG wire and limited to no more than 20 additional feet in total extended length you will be fine. Also, you will need to use a wire with like copper stranding, outer insulation and color, wire gauge size and quality. Solder the connections matching all colors for proper polarity and seal them with heat shrink tubing. If done as directed you will be fine in extending the leads in the field by a total maximum of 20' without effecting product functionality. Please note that once the product is modified – the warranty is void.

When limited by the distance between batteries in a parallel connected battery pack, is it OK to connect the PowerPulse to the Positive and Negative terminals of only the first battery in the pack?

Yes, while it is best to connect to the positive terminal of the first battery and the negative terminal of the last battery, if there is a situation where the distance between the batteries exceeds the distance allowed by the fully extended 6' cable distance of the PowerPulse product, this can be done.

Why does the red LED not immediately come on when I touch the terminals to POS and NEG terminals of a battery?

The PowerPulse is designed to take a small amount of power from the battery and "Pulse" it back into the battery. It takes roughly 2 seconds to "load" the circuit to provide the Pulse input. The complete pulse cycle (load > pulse > re-load > Pulse again) takes about 5 seconds. So, a connection of good solid integrity (bolted on) would need to be made for at least 5 seconds for the red LED Pulse indicator to begin to flash indicating that battery conditioning has begun. On an extremely discharged battery or battery pack flashing can be slower.

What would happen if I accidentally connected the PowerPulse to a battery in reverse?

Well…a few things will happen… 1st - the unit will not function properly or provide the proper service to your battery and, 2nd - the red LED will come on steady (not flashing) and will slowly dim as the unit protects itself from the reverse polarity connection. The unit will not be damaged by temporary reverse connection as it is designed to protect itself. Avoid long term reverse polarity connections if possible.