MBT-1 PulseTech Mini 12V Battery Load Tester
The PulseTech MBT-1 Battery Load Tester quickly and easily checks for good and bad 12-volt lead-acid batteries. This pocket-sized battery load tester is small enough to fit on your key ring and features a rugged weather-resistant design. It includes a fixed post positive connector and a coil-corded moveable negative connector. When all of the color-coded LEDs light up the 12-volt battery is good. One LED lit will indicate a bad battery. Reverse polarity and over voltage protected. NSN: 6625-01-463-8499.
The MBT-1 is a mini-battery tester designed to be a simple, fast and effective diagnostic tool to check for good and bad batteries. A fixed post positive connector and a coil-cord moveable negative connector lets you check multiple batteries quickly. The four LED (A-D) gauge and corresponding information on the back of the tester give you the information necessary to determine whether a battery is good (all four lights are on) and the battery should stay in the vehicle, or bad (one light on) and the battery should be removed from the vehicle. When only 2 or 3 lights are on the battery is partially discharged and needs further analysis.
You can use this tester on any kind of 12-Volt lead-acid battery. When individual batteries are wired in series, the MBT-1 will give you an accurate reading of each battery without disconnecting. When individual batteries are wired in parallel, the MBT-1 will test both batteries together and give you an indication of whether the pair is weak relative to others tested. Parallel batteries should be disconnected to test individually.
· Fixed post positive connector and coil-corded moveable negative connector
· Sequential color-coded LED battery condition display
· All LEDs lit = good battery
· One LED lit = bad battery
· Reverse polarity protected
· Over voltage protected
· Split-ring retainer clip
· Weather resistant
· No internal power supply
· One-Year Limited Warranty
Write Your Own Review