PCS 12V PulseTech 12-Volt Charger Maintainer Pulse System

PCS 12V PulseTech 12-Volt Charger Maintainer Pulse System

PP-12-L PowerPulse 12-Volt Battery Maintenance System

Designed especially for frequently-charged 12-Volt battery systems, the PowerPulse® PP-12-L 12V Battery Maintence System ensures maximum performance on both single 12-Volt lead-acid batteries as well as two or three 12-Volt batteries connected in parallel. The unit is ideal for virtually any kind of vehicle or equipment with a 12-Volt battery system that is charged on a regular basis, including cars, over-the-road trucks, boats, emergency vehicles and generators. Lugs connect directly to the battery terminals.
741X800_PLD.html Designed Especially for Frequently-Charged 12-Volt Battery Systems

Selected as a Top 50 Product by Automotive Engineering magazine, the 12-Volt PowerPulse® is designed to ensure maximum battery performance on single 12-Volt lead-acid batteries. It also works on two or three 12-Volt batteries connected in parallel. 

PowerPulse is not a charger. Charging doesn’t eliminate the main cause of battery failure – energy robbing lead sulfate deposits on battery plates. During this process, the plates gradually become more and more clogged with microscopic lead sulfate deposits. These deposits eventually limit the surface area available for energy transfer and cut back the battery’s ability to accept, store and release energy.

PowerPulse is a performance device designed to help batteries charge faster and provide maximum performance and power by generating an intermittent, optimized high frequency pulse that reduces existing sulfate deposits and keeps them from building up again. The patented pulse technology circuit has been scientifically proven by researchers at two major universities to improve battery performance and longevity.

This small-weather proof product can supplement your existing charging system and can be powered in two different ways. When the battery is being charged either by an onboard charger or a separate charging system, it will use the charging current as a power source. The rest of the time PowerPulse uses a small portion of the battery’s own energy so it is working 24-hours a day so you don’t need an electrical outlet. Accordingly, it should only be used on vehicles or equipment that is regularly used and frequently charged.

      ·    Works on all lead-acid batteries including conventional flooded, sealed maintenance-free, Valve Regulated Lead-Acid (VRLA), Absorbed Glass Mat             (AGM), hybrid, antimony, and calcium-plate designs
      ·    Ensures peak battery performance by eliminating the main cause of lead-acid battery problems and failure – sulfation buildup on battery plates
      ·    Increases battery life span up to five times longer
      ·    Provides greater charge acceptance so batteries recharge faster
      ·    Helps protect the environment by preventing premature battery disposal
      ·    Includes an LED light that indicates the circuit is energized and the unit is working
      ·    Safe, reliable and weather proof
      ·    Five-Year Limited Warranty

There are three other PowerPulse models available for higher voltage battery systems:  24-Volt (735x024), 36-Volt (735x036) and 48-Volt (730x048).


735X012 Model Name: PowerPulse 12-Volt Battery Maintenance System
Model Number: PP-12-L
Part Number: 735X012

Output Electrical
PP-12-L uses a very small portion (< 2%) of the battery’s own energy to produce desulfating pulses.
Desulfating Pulse Peak Amplitude: 2 Amps
Desulfating Pulse Frequency: 18kHz to 37kHz
Pulse Rate Time: 20mS at 2 second intervals

Mechanical/Physical Characteristics
Dimensions: 4”L x 1.75”W x 1”H
Shipping Weight: 0.5lbs
Wire Length: 3’

Environmental
Operating Temperature: 0° to 130°F (-18°C to 54°C)
Storage Temperature: 0° to 150°F (-18°C to 66°C)

Indicators
Red LED pulses when unit is properly connected to battery.

Warranty
Five-Year Limited Warranty

Write Your Own Review
You're reviewing:PP-12-L PowerPulse 12-Volt Battery Maintenance System