RediPulse Pro-12 12 Station Battery Maintenance System

RediPulse Pro-12 12 Station Battery Maintenance System

Xtreme Charge X2 Dual-Station Charger

Xtreme Charge X2 Dual-Station Charger

PRO-12-RP RediPulse12 Station Battery Maintenance System

The RediPulse PRO-12-RP is designed to keep stored 12-Volt lead-acid batteries fully charged with a continuous cycle of low amperage charge which reverses the normal discharge rate. As many as twelve 12-Volt batteries can be connected from a single AC outlet safely without risk of sparking between the battery leads. The PRO-12-RP features optimized high frequency patented pulsing to reduce naturally occurring sulfation buildup. Each unit is equipped with LED lights to indicate the status of each individual battery.
746X915 Keep As Many as 12 Batteries ''Factory Fresh''

All batteries, even new batteries, are subject to a naturally occurring buildup of lead sulfate deposits that reduce the battery's ability to accept, store and release energy. Since batteries frequently spend months in transit and in warehouses before you receive them you are set up to fail despite your best efforts.

If you sell, inventory or service 12-Volt lead-acid batteries (VRLA, AGM, flooded and gel) you'll want the battery you take off the shelf to be as new as the day it was manufactured. The PRO-12-RP 12-Station Battery Maintenance System preserves new and used batteries at peak charge levels by keeping the plates in like-new condition during storage and maintains up to twelve batteries at once. A continuous cycle of low amp charge rotates through the twelve channels offsetting the normal discharge rate. At the same time, optimized high frequency patented pulsing reduces the size and number of lead sulfate deposits so that your shelved batteries stay ''factory fresh'' while waiting to be sold or installed

Using the PRO-12-RP is straight forward and doesn't require extensive training. Simply connect one to twelve 12-Volt lead acid batteries from a single AC outlet safely with no sparking between the battery leads. An audible alarm sounds if a battery is connected improperly making it easy to verify it's installed correctly. The PRO-12-RP will initiate a self-test during which each of the 12 battery LED indicators will come on green, turn yellow and then red. Then the Pulse and Charge indicator LEDs will come on. Once the self-test is complete, the unit will begin cycling through each of the batteries connected.

The PRO-12-RP is a maintenance system and is not designed to operate on batteries below 11.5 volts. Batteries discharged lower than this level should be recharged using the SC-12, SC-6. SC-2 or XCR-20 Battery Recovery Chargers prior to being connected to the PRO-12-RP for maintenance.

  •     Low amperage patented desulfation pulse charge offsets normal discharge rate
  •     Maintains up to twelve batteries in ''factory fresh'' condition indefinitely
  •     Works with all 12-Volt lead-acid batteries (VRLA, AGM, gel and flooded cell)
  •     Patented Pulse Technology reduces and prevents sulfation buildup
  •     Audible alarm signals if cables are reversed
  •     No sparkling between the leads
  •     Completely safe and cannot be overcharged
  •     CEC Compliant
  •     Removable cable and battery clip modules can be replaced (Part number: 735X243)
  •     2-Year Limited Warranty

746X915 Model Name: RediPulse PRO-12 Twelve Station Battery Maintenance System
Model Number: PRO-12-RP
Part Number: 746X915

Electrical Characteristics
Input Electrical
Input Voltage: 100-240 V ac
Input Current: 140 mA Max
Input Frequency: 50 – 60 Hz
Min. Voltage for Startup: 11.5-Volts

Output Electrical
Number of outputs: 12
Output Current: 750 mA
Output Voltage, Bulk Charge: 14.7 V
Absorption to Float Charge Threshold: Battery Voltage = 14.2V Under Charge and Charge Current < 0.75 Amps DC
Desulfating Pulse Peak Amplitude: 250 mA Typical
Desulfating Pulse Frequency: 22kHz to 28kHz
Pulse Rate Time: < 1 microsecond

Mechanical/Physical Characteristics
Dimensions: 7.25”L x 2.25”W x 1”H
Weight: 2lbs
Shipping Weight: 4.3lbs
Box-to-Clamps Wire Length: 72”

Environmental
Operating Temperature: 0º F to 130 º F (-18º C to 54º C)
Storage Temperature: 0º F to 150 º F (-18 º C to 66 º C)

Safety and Compliance
CEC Compliant

Warranty
Two-Year Limited Warranty

Write Your Own Review
You're reviewing:PRO-12-RP RediPulse12 Station Battery Maintenance System