WC2200 PulseTech 12-Volt Pulse Charger World Version Plus
The WC2200 Pulse Charger World Version Plus is a necessity for any facility that encounters battery problems. It is voltage regulated and microprocessor controlled. This state-of-the-art charging system (up to 16 amps) works off either 110- or 220-Volt AC power on all 12-Volt lead-acid batteries (flooded cell, AGM, gel and VRLA) anywhere in the world. It is able to recover batteries by cleaning the battery plates from charge-robbing sulfation buildup and automatically shuts off when the battery reaches full charge.
NSN: 6130-01-477-4703.
USMC NSN: 6130-01-618-4572.
RECOVERS BATTERIES THOUGHT TO BE DEAD AND USELESS
NSN 6130-01-477-4703
USMC NSN: 6130-01-618-4572
The Pulse Charger World Version Plus reduces battery-related equipment down time, maintenance time and the cost of replacing batteries previously thought beyond saving. This state-of-the-art charging system works with 12-Volt lead-acid VRLA, AGM, gel and flooded batteries and uses either 110- or 220-Volt AC power so it can be used anywhere in the world. It comes in a portable, heavy duty case so you can take it wherever it’s needed.
The voltage regulated, microprocessor controlled charger will provide all the charge needed to charge a battery to the optimum level regardless of the rated amp-hour capacity or rated cold cranking amps by constantly monitoring the battery and adjusting the charging current (up to 16 Amps). When the optimum level is reached, the charger switches to float mode so the battery cannot be overcharged no matter how long it stays connected.
Throughout the charging process, the Pulse WC2200 continuously emits a series of high frequency pulse shaped waves of DC current to reduce sulfation buildup -- the main cause of battery failure. Sulfation buildup occurs as lead sulfates form on the battery plates during the normal charge/discharge cycles, even on new batteries. These energy-robbing deposits can reduce the battery’s ability to accept and keep a charge until the battery dies. Our Pulse Technology breaks down these deposits to improve the performance and extend the life of your batteries up to three times.
Colored LEDs indicate the battery’s state of charge at 25%, 50%, 75% and 100% as well as when the charger is charging and pulsing and when the battery is bad and cannot be recharged.
• Charges and maintains 12-Volt lead-acid VRLA, AGM, gel and flooded batteries
• Desulfating pulses extend battery life by three times
• Reverse battery protection and indication
• Sparkless operation
• Quick disconnect at battery
• Over temperature protection
• Output current limit protection
• Heavy duty clamp type battery cables
• One-Year Warranty