PP-24-L PowerPulse 24-Volt Battery Maintenance System

PP-24-L PowerPulse 24-Volt Battery Maintenance System

PCS 24V PulseTech 24V Battery Charger Maintainer

The PCS 24-Volt Charger Maintainer Pulse System is ideal for maintaining 24-Volt lead-acid batteries stored indoors on a long-term basis. Colored lights indicate AC charge status and battery conditioning. The PCS prevents unused batteries from losing their charge and removes lead sulfate crystals that build up on battery plates. This 24V Battery Charger & Maintainer has the capacity to maintain six 12-Volt batteries in twenty-four volt sets. Power supply is reverse polarity protected and the battery cannot be overcharged. NSN 6130-01-521-1329.

NSN 6130-01-521-1329

The PCS 24-Volt Charger Maintainer Pulse System maintains and desulfates any kind of 24-Volt lead-acid battery (flooded cell, sealed, VRLA and AGM). This ruggedized, weatherproof unit is ideal for maintaining batteries in vehicles and equipment in long-term indoor storage as it has the ability to reverse the normal discharge rate that occurs in unused batteries and removes naturally occurring lead sulfate crystals that build up on battery plates over time.

As a battery ages through use or sits unused for periods of time, lead sulfate crystals enlarge and can build-up excessively to the point where they create a physical barrier across the surface of the plate. Before long, this build-up can become so dense that a battery is no longer able to accept or release energy. The PCS contains PulseTech’s Pulse Technology, which is an exclusive, patented system which cleans batteries of sulfation build up and restores them to normal operation.
What makes Pulse Technology so unique and effective is a distinct pulse waveform. This waveform has a strictly-controlled rise time, pulse-width, frequency and amplitude of current and voltage pulse. Pulse Technology removes and prevents the buildup of damaging lead-sulfate deposits on battery plates in a non-harmful way, so a battery can accept, store and release maximum power all the time.
The PCS’ control circuits prevent overcharging by automatically sensing battery condition. The PCS turns off when the battery is fully charged and turns back on again when the voltage drops too low. This allows the user to simply plug the PCS in and walk away without needing to check on the battery’s voltage level.
LEDs show the status of the charger minimizing the need for operator training. The green light indicates whether the AC power is on or off. The yellow LED is lit when the AC power is charging and is off when the charge is complete. The red blinking LED shows that our optimized high frequency pulsing technology is active.
This unit also has the capacity to maintain six 12-Volt batteries in twenty-four volt sets to allow for additional applications.

735X667 Model Name: 24V Pulse Charge System
Model Number: PCS 24V  
Part Number: 735X667

Input Electrical:
Input Voltage: 100VAC to 250VAC
Input Current: 0.50 Amps Max
Input Frequency: 50 – 60 Hz
Output Electrical:
Output Current: 0.60 Amps Max per output
Output Voltage, Bulk Charge: 29.4 Volts
Desulfating Pulse Peak Amplitude: 1.0 Amps Typical
Desulfating Pulse Frequency: 11kHz
Pulse Rise Time: < 1 microsecond

Mechanical / Physical Characteristics
Dimensions: 5.5”x3.2”x2.7”
Weight: 2.4 lbs.
Shipping Dimensions: 12.5”x6.5”x4.25”
Shipping Weight: 2.8 lbs.                                 
Enclosure: ABS Box
AC Power Cord Cable Length:  6’         
Lug Cable Length:  12’                                    
Operating Temperature: 0º F to 130 º F (-18º C to 54º C)
Storage Temperature: 0º F to 150 º F (-18 º C to 66 º C)

Green LED – AC power is on
Yellow LED – AC power is charging
Red Blinking LED – Pulse technology is active

Write Your Own Review
You're reviewing:PCS 24V PulseTech 24V Battery Charger Maintainer