SolarPulse SP-7-OBD-T 12V Temporary Solar Charger Maintainer, 7W

SolarPulse SP-7-OBD-T 12V Temporary Solar Charger Maintainer, 7W

SolarPulse SP-7-OBD-A 12V Temporary Solar Charger Maintainer, 7W

The PulseTech® SP-7-OBD-A SolarPulse® 7-Watt Temporary Solar Charger restores and maintains the normal loss of 12V lead-acid battery power on cars, small trucks and other outdoor equipment. This temporary solar charger can be installed and removed in minutes. It connects directly to the vehicles OBD2 port. Four suction cups attach the solar panel to the vehicle's interior windshield. The solar panel replaces the power loss from electrical accessories that occurs in seldom or erratically used outdoor vehicles even when the ignition is switched off. It's also great for vehicles with lots of accessories and high parasitic loads. Pulse Technology reverses sulfate crystal buildup on the battery plates.

The SP-7-OBD-A solar panel can be used on a single 12-Volt battery or up to two 12-Volt batteries connected in parallel. It is a higher watt version of the SP-5-OBD-T SolarPulse 12V Temporary Battery Solar Charger, 5W.

DRAMATICALLY REDUCE JUMP STARTS AND EXTEND BATTERY LIFE

This 7-Watt SolarPulse Temporary Charging System provides a full 7-Watts of power in a compact, durable 10.25''L x 8.85''W x 0.25''H solar panel. That's almost half the size of solar panels used in other solar chargers so that you have the most installation options for your vehicle. Like all SolarPulse models, the SP-7-OBD-A utilizes our unrivaled solar charging system combined with our patented optimized high frequency pulsing circuit, Pulse Technology, to ensure batteries start when needed drastically reducing the need for jump starts. Pulse Technology reverses the naturally occurring process of battery sulfation - the main cause of battery failure. This allows batteries to accept, store and release maximum power all the time extending battery life three times.

If you've used solar chargers before, you know it's important to choose the right solar panel for the amount of power you need and the size and place of the mounting location. In the past to get the power you need, you had to struggle with panels that are too big, too bulky and too fragile. SolarPulse's higher efficiency, higher quality crystalline silicone cells pack more power per square inch and have a longer life than standard amorphous ''thin film'' cells. That means you can get the power you need in a sturdier, smaller-sized solar panel. Instead of a breakable glass coating, SolarPulse's solar panels are protected with a clear polyurethane plastic coating that makes them virtually indestructible and impervious to weather aging and damage from bumps and knocks.

•    Works on ANY 12V lead-acid battery 
•    Maintains batteries at full state of charge
•    Quick and easy temporary installation
•    Dramatically reduce jump starts
•    30% smaller footprint than typical panels 
•    Commercial grade solar panel is virtually indestructible
•    Patented Pulse Technology extends battery life three times
•    Supports sustainability programs
•    Reverse polarity protected
•    Ten-Year Limited Warranty (excluding suction cups)

Name: SP-7-OBD-A SolarPulse Temporary Solar Charger, 7-Watt
Part Number: 735X707
Model Name: SP-7-OBD-A

Output Electrical
Output Current: 450 mA
Output Voltage, Bulk Charge: 16.5 V dc

Mechanical/Physical Characteristics
Solar Panel Dimensions: 10.25''L x 8.85''W x 0.25''H
Circuit Box Dimensions: 3.4” L x 2.4” W x 1.5” H
Weight: 2.4lbs
Shipping Weight: 3lbs
Box to Lug Wire Length: 3'
Box to Panel Wire Length: 17'
Quick Disconnect Between Solar Panel & Circuit Box

Environmental
Operating Temperature: 0° F to 130° F (-18° C to 54° C)
Storage Temperature: 0° F to 150° F (-18° C to 66° C)

Indicators
Red LED shines steady in full sunlight and dims in partial light

Warranty
Ten-Year Limited Warranty (excluding suction cups)

Write Your Own Review
You're reviewing:SolarPulse SP-7-OBD-A 12V Temporary Solar Charger Maintainer, 7W