12VPSC PulseTech 12V Battery Solar Pulse Charger Maintainer, 2W

12VPSC PulseTech 12V Battery Solar Pulse Charger Maintainer, 2W

Cup Set #4 PulseTech Replacement Suction Cups for SP-5 & SP-10

Cup Set #4 PulseTech Replacement Suction Cups for SP-5 & SP-10

SP-10 SolarPulse 12V Battery Solar Charger Maintainer, 10W

The PulseTech® SP-10 SolarPulse® Battery Charger & Maintainer is designed to supply pulsed current to charge, maintain and desulfate any 12V lead-acid batteries including VRLA, AGM, Gel and flooded cell on outdoor vehicles and equipment, without danger of overcharging or overheating. It is ideal for charging three to four 12V lead-acid batteries connected in parallel, helping to ensure that your batteries remain in peak contition. This solar battery charger maintainer is protected with a clear polyurethane plastic coating that makes it virtually indestructible. It features a solid LED light - indicator of full sunlight/ working at optimum level. The light will blink when the panel is exposed to partial sunlight. Reverse polarity protected. Patented Pulse Technology extends battery life up to 3 times.

The SP-10 10-Watt solar panel dimensions are 12.41" L x 9.85" W x 0.2" H. It comes with a 3' box-to-lug wire and 17' box-to-panel wire. Five-Year Limited Warranty.

MAXIMIZES THE PERFORMANCE OF BATTERIES CONNECTED IN PARALLEL

The SP-10 solar charger combines PulseTech’s patented, high frequency Pulse Technology with microprocessor controlled intelligent charging algorithms to charge, condition and maintain vehicle and equipment batteries. Pulse Technology reverses the naturally occurring process of battery sulfation - the main cause of battery failure. This allows batteries to accept, store and release maximum power all the time extending battery life up to three times.

If you've used solar chargers before, you know it's important to choose the right solar panel for the amount of power you need and the size and place of the mounting location. In the past to get the power you need, you had to struggle with panels that are too big, too bulky and too fragile. With SolarPulse, you get the power you need with the most installation options for your outdoor vehicles and equipment. SolarPulse's higher efficiency, higher quality monocrystalline cells pack more power per square inch and have a longer life than standard amorphous ''thin film'' cells. That means you can get the power you need in a sturdier, smaller-sized solar panel. Instead of a breakable glass coating, SolarPulse's solar panels are protected with a clear polyurethane plastic coating that makes them virtually indestructible and impervious to weather aging and damage from bumps and knocks.

•    Works on ANY 12V lead-acid battery (VRLA, AGM, gel and flooded cell)
•    Keeps 3-4 batteries connected in parallel in peak condition
•    Maintains batteries at full state of charge
•    Drastically reduces jump starts
•    30% smaller footprint than typical panels
•    Commercial grade solar panel is virtually indestructible
•    Patented Pulse Technology extends battery life up to 3X
•    Supports sustainability programs
•    Reverse polarity protected
•    Five-Year Limited Warranty

Name: SP-10 SolarPulse Solar Charger, 10-Watt
Part Number: 735X310
Model Name: SP-10
NSN: Pending

Output Electrical
Output Current:  625 mA
Output Voltage, Bulk Charge:  16.5 V dc

Mechanical/Physical  Characteristics
Solar Panel Dimensions: 12.41” L x 9.85” W x 0.2” H
Circuit Box Dimensions:  3.4” L x 2.4” W x 1.5” H
Shipping Weight: 2.9lbs
Weight: 2.5lbs
Box to Lug Wire Length:  3'
Box to Panel Wire Length:  17'
Quick Disconnect Between Solar Panel & Circuit Box

Environmental
Operating Temperature: 0º F to 130 º F (-18º C to 54º C)
Storage Temperature: 0º F to 150 º F (-18 º C to 66 º C)

Indicators
Red LED shines steady in full sunlight

Warranty
Five-Year Limited Warranty

Write Your Own Review
You're reviewing:SP-10 SolarPulse 12V Battery Solar Charger Maintainer, 10W