SP-25 SolarPulse 12V Battery Solar Charger Maintainer, 25W

SP-25 SolarPulse 12V Battery Solar Charger Maintainer, 25W

12V ERV UNIT SolarPulse 12V Battery Solar Charger Maintainer, 7W

12V ERV UNIT SolarPulse 12V Battery Solar Charger Maintainer, 7W

SP-5-OBD-T SolarPulse 12V Temporary Solar Charger Maintainer, 5W

The PulseTech® SP-5-OBD-T SolarPulse® 5-Watt Temporary Solar Charger restores and maintains the normal loss of 12V lead-acid battery power on outdoor vehicles and equipment. This temporary solar charger can be installed and removed in minutes. It connects directly to the OBD port. Four suction cups attach the solar panel to the vehicles hood, roof or fender. The solar panel replaces the power loss from electrical accessories that occurs in seldom or erratically used outdoor vehicles even when the ignition is switched off. Pulse Technology reverses sulfate crystal buildup on the battery plates. By keeping battery plates clean, batteries recharge faster, accept a full charge and work at maximum power.

The SP-5-OBD-T solar panel can be used on a single 12-volt battery or two 12-volt batteries connected in parallel.


The 5-Watt SolarPulse Temporary Charging System provides a full 5-Watts of power in a compact, durable 8.8''L x 8.8''W x 0.25''H solar panel. That's almost half the size of solar panels used in other solar chargers so that you have the most installation options for your vehicle. Like all SolarPulse models, the SP-5-OBD-T utilizes our unrivaled solar charging system combined with our patented optimized high frequency pulsing circuit, Pulse Technology, to ensure batteries start when needed drastically reducing the need for jump starts. Pulse Technology reverses the naturally occurring process of battery sulfation - the main cause of battery failure. This allows batteries to accept, store and release maximum power all the time extending battery life three times.

If you've used solar chargers before, you know it's important to choose the right solar panel for the amount of power you need and the size and place of the mounting location. In the past to get the power you need, you had to struggle with panels that are too big, too bulky and too fragile. SolarPulse's higher efficiency, higher quality crystalline silicone cells pack more power per square inch and have a longer life than standard amorphous ''thin film'' cells. That means you can get the power you need in a sturdier, smaller-sized solar panel. Instead of a breakable glass coating, SolarPulse's solar panels are protected with a clear polyurethane plastic coating that makes them virtually indestructible and impervious to weather aging and damage from bumps and knocks.

•    Works on ANY 12V lead-acid battery
•    Maintains batteries at full state of charge
•    Quick and easy temporary installation
•    Drastically reduce jump starts
•    30% smaller footprint than typical panels
•    Commercial grade solar panel is virtually indestructible
•    Patented Pulse Technology extends battery life three times
•    Supports sustainability programs
•    Reverse polarity protected
•    Five-Year Limited Warranty (excluding suction cups)

735X345 Model Name: SolarPulse 12V Temporary Solar Charger Maintainer, 5-Watt
Model Number: SP-5-OBD-T
Part Number: 735X345

Input Electrical
Solar Powered

Output Electrical
Output Current:  350 mA
Output Voltage, Bulk Charge:  16.5 V dc

Mechanical/Physical  Characteristics
Circuit Box Dimensions:  3.4'' L x 2.4'' W x 1.5'' H
Solar Panel Dimensions: 8.8'' L x 8.8'' W x 0.25'' H
Shipping Weight: 3.1lbs
Box to Panel Wire Length:  17''
Box to OBD Connector Length:  3'
Quick Disconnect Between Solar Panel & Circuit Box
Suction Cups: High quality weatherproof suction cups

Operating Temperature:  0°F to 130°F
Storage Temperature:  0°F to 150°F

Red LED shines steady in full sunlight and dims in partial sunlight

5-Year Limited Warranty (excluding suction cups)

Write Your Own Review
You're reviewing:SP-5-OBD-T SolarPulse 12V Temporary Solar Charger Maintainer, 5W