12V ERV UNIT SolarPulse 12V Battery Solar Charger Maintainer, 7W

SolarPulse 12V 7W ERV UNIT Solar Battery Charge Maintainer, 7W

12VPSC PulseTech 12V Battery Solar Pulse Charger Maintainer, 2W

12VPSC PulseTech 12V Battery Solar Pulse Charger Maintainer, 2W

SPCS 12V PulseTech 12-Volt Solar Charger Maintainer, 2.8-Watt

The PulseTech™ SPCS 12V Solar Pulse Charge System is ideal for maintenance of all kinds of 12-Volt lead-acid batteries in vehicles in long term storage whether indoors or outside. With the 2.8-Watt solar panel, the same system provides battery maintenance when your vehicle is on the road or parked outside. Colored LEDs indicate AC charge status and battery conditioning.

The SPCS 12V solar charger has the capacity to charge up to four 6-Volt or 12-Volt batteries connected in parallel.

NSN: 6130-01-521-1317.


When your vehicle is in long-term storage, you can use the 12-Volt Solar Pulse Charge System to keep your vehicle ready to go the first time you start it. All of the solar power from the 2.8-Watt solar panel goes directly to charge and maintain the lead-acid batteries when your vehicle is on the road or parked outside. The solar panel is used to provide positive charge to the batteries when AC power is not available. All of PulseTech’s solar panels have higher efficiency, higher quality crystalline silicon cells that pack more power per square inch and have a longer life than standard amorphous “thin film” solar cells. That means you can get the power you need in a sturdier, smaller-sized solar panel.

Without the solar panel, the PCS is ideal for indoor or under cover stored vehicles. What sets this system apart is that there is no “float” charge with the potential to destroy batteries stored for long periods of time. The charge features is either on or off so you cannot overcharge the battery. The SPCS monitors the battery system condition and if the voltage drops too low, the charger will come back on. The green light indicates whether the AC power is on or off. The yellow LED is lit when the AC power is charging and is off when the charge is complete. The red blinking LED shows you that our high frequency pulsing technology is active 24 hours a day to reverse the naturally occurring process of battery sulfation - the main cause of battery failure. The pulse minimizes capacity robbing crystal lead sulfate buildup and extends the life and efficiency of the battery. The combined charge and maintenance cycles ensure your stored vehicle battery will start when you need it.

    • Charges and maintains all kinds of 12-Volt lead-acid batteries (VRLA, AGM, gel and flooded cell)
    • Charges and maintains up to four 6-Volt or 12-Volt battery systems connected in parallel
    • Use whether vehicles are stored indoors or outside
    • Will not overcharge the battery
    • Has smaller size solar panel with higher efficiency, longer life crystalline silicon cells
    • One Year-Limited Warranty

Model Name: 12-Volt Pulse Charge System
Model Number: SPCS 12V
Part Number: 735X655
NSN: 6130-01-521-1317

Electrical Characteristics
Input Electrical
Input Voltage: 110 to 240 VAC
Input Frequency: 50 to 60 Hz

Solar Panel Input
Open Circuit Voltage (OCV): 17.4 VDC
Output current: 155 mA °10%

Output Electrical
Pulse Output: Continuous

Mechanical / Physical Characteristics
Circuit Box Dimensions: 5.5'' x 3.2'' x 2.4''
Solar Panel Size: 8.6'' x 5.54'' x 0.125 (Encapsulated in Lexan)
Shipping Weight: 3.55lbs
Enclosure: ABS
Battery leads Red (+) & Black (-), 18 AWG with 3/8'' Lugs
Fused positive lead
Solar Panel Cable Length: 20'
Lug Cable Length: 12'
AC Power Cord Cable Length: 6'

Operating Temperature: 0° F to 130 ° F (-18° C to 54° C)
Storage Temperature: 0° F to 150 ° F (-18 ° C to 66 ° C)

Green LED ° AC power is on
Yellow LED ° Charging
Red Blinking LED ° Pulse technology is active

Write Your Own Review
You're reviewing:SPCS 12V PulseTech 12-Volt Solar Charger Maintainer, 2.8-Watt