Cup Set #4 PulseTech Replacement Suction Cups for SP-5 & SP-10

Cup Set #4 PulseTech Replacement Suction Cups for SP-5 & SP-10

SolarPulse SP-10-OBD-A 12V Solar Charger Maintainer, 10W

SolarPulse SP-10-OBD-A 12V Solar Charger Maintainer, 10W

SP-10-OBD-T PulseTech 12V Solar Pulse Charger/ Maintainer, 10W

The PulseTech® SP-10-OBD-T Temporary SolarPulse® Battery Charger features the OBD (on-board diagnostics) J1939-1 connector for 3-4 batteries. It is designed to charge, maintain and desulfate any 12V lead-acid batteries including VRLA, AGM, Gel and flooded cell on outdoor vehicles & equipment, without overcharging or overheating. The SP-10-OBD-T is ideal for charging 12V lead-acid batteries connected in parallel. A clear polyurethane plastic coating makes this battery charger virtually indestructible. A solid LED indicates full sunlight, and blinking - partial sunlight. Reverse polarity protected. The Pulse Technology extends battery life up to 3 times.

The SP-10-OBD-T solar charger can be installed and removed in minutes by connecting directly to the OBD port. The 10W solar panel measures 12.41"L x 9.85"W x 0.2"H. It comes with suction cups, OBD connector and cables. Five-Year Limited Warranty.

DRASTICALLY REDUCE JUMP STARTS AND EXTEND BATTERY LIFE

This 10-Watt SolarPulse Temporary Charging System provides a full 10-Watts of power in a compact, durable 12.41"L x 9.85"W x 0.2"H solar panel and is ideal for use with 3-4 batteries connected in parallel. The solar panel attaches to the interior windshield with the included suction cups and plugs directly into the OBD port. The set up allows for easy installation and removal in seconds and ensures batteries remain in peak condition no matter how long the vehicle sits unused outside.

Like all SolarPulse models, the SP-10-OBD-T utilizes our unrivaled solar charging system combined with our patented optimized high frequency pulsing circuit, Pulse Technology, to ensure batteries start when needed eliminating the need for jump starts. Pulse Technology reverses the naturally occurring process of battery sulfation - the main cause of battery failure. This allows batteries to accept, store and release maximum power all the time extending battery life three times.

If you've used solar chargers before, you know it's important to choose the right solar panel for the amount of power you need and the size and place of the mounting location. In the past to get the power you need, you had to struggle with panels that are too big, too bulky and too fragile. With SolarPulse, you get the power you need with the most installation options for your outdoor vehicles and equipment. SolarPulse's higher efficiency, higher quality monocrystalline cells pack more power per square inch and have a longer life than standard amorphous ''thin film'' cells. That means you can get the power you need in a sturdier, smaller-sized solar panel. Instead of a breakable glass coating, SolarPulse's solar panels are protected with a clear polyurethane plastic coating that makes them virtually indestructible and impervious to weather aging and damage from bumps and knocks.

•    Works on ANY 12V lead-acid battery (VRLA, AGM, gel and flooded cell)
•    Maintains 3-4 batteries at full state of charge
•    Quick and easy temporary installation
•    Drastically reduce jump starts
•    30% smaller footprint than typical panels
•    Commercial grade solar panel is virtually indestructible
•    Patented Pulse Technology extends battery life three times
•    Supports sustainability programs
•    Reverse polarity protected
•    Five-Year Limited Warranty (excluding suction cups)

Name: SolarPulse 12V Temporary Solar Charger Maintainer, 10-Watt
Part Number: 735X351
Model Number: SP-10-OBD-T

Input Electrical
Solar Powered

Output Electrical
Output Current:  625 mA
Output Voltage, Bulk Charge:  16.5 V dc

Mechanical/Physical  Characteristics
Solar Panel Dimensions: 12.41” L x 9.85” W x 0.2” H
Circuit Box Dimensions:  3.4” L x 2.4” W x 1.5” H
Shipping Weight: 2.9lbs
Weight: 2.5lbs
Box to Lug Wire Length:  3'
Box to Panel Wire Length:  17'
Quick Disconnect Between Solar Panel & Circuit Box

Environmental
Operating Temperature: 0º F to 130 º F (-18º C to 54º C)
Storage Temperature: 0º F to 150 º F (-18 º C to 66 º C)

Indicators
Red LED shines steady in full sunlight

Warranty
5-Year Limited Warranty (excluding suction cups)

Write Your Own Review
You're reviewing:SP-10-OBD-T PulseTech 12V Solar Pulse Charger/ Maintainer, 10W